Computerized Tensile (compression) testing machine QC-548M2F
Manufacturer : Cometech – Taiwan
Industry: Rubber, Plastic, Paper, Textile, Metal, Wood, Tape, Electronics, Packaging, Medical, Architecture.
Features Computerized Tensile (compression) testing machine QC-548M2F :
- Computerized Tensile (compression) testing machine confirm to ISO 7500-1, ASTM E4 , ASTM D-76, DIN5122 , JIS B7721/B7733 , EN 1002-2, BS1610,GB T228 Standard
- QC-548M2F table type Max. Capacity 5kNprovided the quiet testing environment and high accuracy test result. Stand-alone mode for tensile test, compression test, bending test and all kind of testand maintenance-free of servo drive system.
- The machine has single-separated electric control box, separate electronic control system to avoid interference with the transmission components to increase test stability and also conducive to the maintenance and updating of electronic systems.
- Support precision jog-wheel can be fine tuning machine movement, with precision positioning and accurate calibration to increase test accuracy. High-speed signal feedback mechanism can reduce the chance of machine overload.
- The reserved external signal can be connected to an external signal source, increasing machine control mode.
Specifications Computerized Tensile (compression) testing machine QC-548M2F :
|Model||QC-548M2F||QC-548M2F with extend height|
|Max. Capacity||5 kN||2kN|
|Units||Force: gf, kgf, lbf, N, kN, ozf, tonf(SI), ton(long), tonf(short)|
Pressure: Kpa, Mpa, psi, bar, mm-Aq, mm-Hg
|Test stroke(w/o grip)||800 mm||1100 mm|
|Speed range||0.0002 ~ 1000 mm/min (adjustable)|
|Speed precision at High speed mode||0.05~ 1000 mm/min|
|Speed precision at Low speed mode||0.0002 ~ 4 mm/min|
|Data Sampling||Maximum1200 Hz|
|Motor type||servo motor|
|Feature||※Automatic reading of load cell information|
※Automatic reading of displacement sensor information
※Force display, displacement display, time display, stress display and strain display
※External analog input (reading of voltage or current at the same time via two channels)
※Force zeroed automatically
※Force calibration based on user’s preference
※Breaking point detection
|Power Supply||Single phase 200 ~ 240VAC，5A|
|Dimension of Machine||50× 53 × 145 cm||50× 53 × 180 cm|
|Weight of Machine||80 kg||95 kg|
1. Data sample rate faster can be set up to 1200 Hz
2. Operation method:Full-computerized control to run the test or Jog button control
3. Compatible with Window 7 /8 system
4. Software has multi-languages.
5. Interface for TCP/IP
6. Multi-curves display and real-time plot
7. Various units of measurement are available
8. Flexible form to manage database.
9. Free to name the data file.
10. Testing screen is selective to display data, graph at the same time.
11. Data processing: file saving, setting loading, report printing and data comparing.
12. Graph display: strain v.s. elongation, strain v.s. time and so on.
13. Tensile test, compression test, bending test, peel test…
14. Software protection: Overload, over -displacement ,over-time protection
15.Variety of test actions, ex.reciprocation, creep, hold tensile (compression), test pause, slip test, etc.
16.Modularization of specimen setting, providing easy to set specimen.
17.Modularization of test conditions to reduce artificial settingnegligence and error.
18.Key data capture, can set the upper and lower limits of test data specifications
19.Support multiple sets of I / O signals, increase testing mechanism
For more information about products, please contact us:
COMETECH EXCLUSIVE REPRESENTATIVE IN VIETNAM
See more product :