Specializes in supplying a wide range of equipment to laboratory
Sản phẩm
Water Stills Boeco Bidest 4
From
BOECO BIDEST 4 is our Bidistiller designed to work automatically with a production of 4 liters per hour, includes several safety systems to work continuously.
BOECO BIDEST 4 is our Bidistiller designed to work automatically with a production of 4 liters per hour, includes several safety systems to work continuously.
Produces distilled water for the most common applications in the laboratory.
Boiler and Condenser are made of borosilicate glass 3.3, The heaters are sheated with quartz glass. This is ideal for producing high quality water, free of metal ions and pyrogens, with a conductivity 1-2 µS / cm.
Incorporates several security systems for automatic operation: presostat, electrovalve and level sensor.
Cooling water outlet by rubber tube. The condensed water not flowing through the cooling water outlet
Energy saving through distillation of preheated cooling water.
Distillation process visible through the front screen.
The main switch and monitor drivers are on the front of the unit
Control of water level automatic cut off power in case of lack of water
Output of the distillate on the side of the unit.
Output of carbon dioxide through hole of the top of condersers
Suitable for wall mounting.
safety systems
preostat Safety thermostat protects still in the event of water supply failure.
Electrovalve It cuts water and electrical supply to avoid useless expenses of water and electricity. It returns to open water inlet if the electrical supply is enough to let the water still to work properly.
Level device Device to fill a container without worrying when it finished. It cuts water and electrical supply to avoid useless expenses of water and electricity.
Note on the water output: Depends directly on the quality of water supply and other environmental factors, maybe type III (according to ASTM). As distillates are open to the atmosphere before measurements can be made, the value of conductivity is really much less (down to 10 times) than it is really measured. Any ultra pure water in contact with the atmosphere has a conductivity of 1-2 µS/ cm and a pH of of 5, due to the small amount of CO2 (0.05 ppm) from the atmosphere.