Cart (0) 
QC-548M2F-S Universal Materials Testing Machines (2~5kN M2F)
QC-548M2F-S This table type single-column UTM is with max. 5kN capacity. It provides users a quiet testing environment and high precision test results. The optional display panel can operate tests such as tensile, compression and peeling under stand-alone mode.
Description
- QC-548 M2F-S – This table type single-column UTM is with max. 5kN capacity. It provides users a quiet testing environment and high precision test results. The optional display panel can operate tests such as tensile, compression and peeling under stand-alone mode.
- The maintenance-free transmission mechanisms highly reduce the future maintenance problems. This machine is equipped with an independent electronic control box which can avoid signal interference and increase the test stability, making it better for future maintenance and update of electronic system.
- The manual jog can increase the accuracy of position and calibration. The high-speed feedback signal reduces the overload risk. The external signals are also acceptable for various machine control modes.
- Catalog: https://www.come-tech.com.tw/en/Product/detail/machine/UniversalMaterialsTestingMachinesQC-513M2F
Application:
Industry: Rubber, Plastic, Paper, Textile, Metal, Wood, Tape, Electronics, Packaging, Medical, Architecture.
Conform to Standards
- ISO 7500-1
- ASTM E4
- ASTM D-76
- DIN 5122
- JIS B7721
- JIS B7733
- BS EN 1002-2
- BS 1610
- GB/T 228
Application
ASTM D790, ISO 178 Bending test
ASTM D882 Film Tensile Test
ASTM D638 Plastic Tensile Test
ASTM D412 Rubber Tensile Test
ASTM D1000 ASTM D3330 Tape Peeling Test
Features Computerized Tensile (compression) testing machine QC-548M2F :
-
QC-548M2F-S confirm to ISO 7500-1, ASTM E4 , ASTM D-76, DIN5122 , JIS B7721/B7733 , EN 1002-2, BS1610,GB T228 Standard
-
QC-548M2F-S table type Max. Capacity 5kNprovided the quiet testing environment and high accuracy test result. Stand-alone mode for tensile test, compression test, bending test and all kind of testand maintenance-free of servo drive system.
-
The machine has single-separated electric control box, separate electronic control system to avoid interference with the transmission components to increase test stability and also conducive to the maintenance and updating of electronic systems.
-
Support precision jog-wheel can be fine tuning machine movement, with precision positioning and accurate calibration to increase test accuracy. High-speed signal feedback mechanism can reduce the chance of machine overload.
-
The reserved external signal can be connected to an external signal source, increasing machine control mode.
Specifications Computerized Tensile (compression) testing machine QC-548M2F-S :
- Max. Capacity: 5kN
- Force Resolution
- Test Stroke(w/o grip): 400 mm
- Speed Range: 0.001-3000mm/min
- Data sampling rate: Max. 1200Hz
- Motor: Servo Motor
- Dimension: 50 x 50x 105 cm
- Weight: 65 kg
Accessories
1. Display Panel
-7″ color touch TFT display panel is used.
-Chinese, English, Japanese are supported.
-Displays force, pressure, displacement and time.
-Supports test speed, direction, auto-return, stop at the break point as test conditions.
-Can analyze max. force, interval force, force at break point, and so on.
-Provides multiple stop condition settings including force, displacement, time and elongation.
-Supports over travel, overload, overtime stop protection settings.
-Can save up to 50 test results; it also supports saving to USB.
-Restore the machine to factory setting is available.
-Can calibrate with stand-alone mode.
-Supports switching between Metric and Imperial units.
2. QC-551 Long Extensometer
QC-551 Long extensometer is suitable for higher than 20% elongation of rubber, plastic, PE, fabric, webbing of material which are high elongation measurement accessories. The specimen usually made dumbbell-shape. The extensometer can link with Cometech machine and auto-detect the deformation of the test piece during the test.
3. QC-557 Short extensometer
QC-557 Short extensometer can measure metal, hard plastic of less than 100% elongation of material deformation. During test, it can measure complete test deform rate and do not need to dismantle it when during the test. When the specimen gauge length is longer or elongation rate is bigger, customized longer extensometer is also available.
M2F Software Functions:
1. Data sample rate faster can be set up to 1200 Hz
2. Operation method:Full-computerized control to run the test or Jog button control
3. Compatible with Window 7 /8 system
4. Software has multi-languages.
5. Interface for TCP/IP
6. Multi-curves display and real-time plot
7. Various units of measurement are available
8. Flexible form to manage database.
9. Free to name the data file.
10. Testing screen is selective to display data, graph at the same time.
11. Data processing: file saving, setting loading, report printing and data comparing.
12. Graph display: strain v.s. elongation, strain v.s. time and so on.
13. Tensile test, compression test, bending test, peel test…
14. Software protection: Overload, over -displacement ,over-time protection
15.Variety of test actions, ex.reciprocation, creep, hold tensile (compression), test pause, slip test, etc.
16.Modularization of specimen setting, providing easy to set specimen.
17.Modularization of test conditions to reduce artificial settingnegligence and error.
18.Key data capture, can set the upper and lower limits of test data specifications
19.Support multiple sets of I / O signals, increase testing mechanism
For more information about products, please contact us:
COMETECH EXCLUSIVE REPRESENTATIVE IN VIETNAM
See more product :
