Cart (0) 
QC-500M1F Universal Materials Testing Machines (100kN~600kN | M1F)
QC-500M1F is a UTM series with capacity 500kN or over, commonly used to perform tensile, compression, bending tests, and so on. This series adopts a high torque servo motor to support its movement and motive power.
Description of QC-500M1F
- QC-500M1F is a UTM series with capacity 500kN or over, commonly used to perform tensile, compression, bending tests, and so on. This series adopts a high torque servo motor to support its movement and motive power.
- To reduce the maintenance problems, QC-500M1F has high rigidity and strength of the construction. It not only provides users a quiet testing environment but also high precision test results.
- TQC-500M1F can be applied to metal, composites, construction material, and other materials that require high test force.
- The machines are all equipped with a jog to control precise positioning and up/down forward movement to prevent overload during the load cell calibration. The optional display can support stand-alone operation with simple tests.
- Download catalog: https://www.come-tech.com.tw/en/pdf/3904
Conform to Standards
- ISO 7500-1
- ASTM E4
- JIS 475-88
- JIS B7721
- JIS B7733
- DIN 5122
- BS EN 1002-1
- BS 1610
- GB/T T228
Industry
Plastic、 Textile、Metal and Architecture.
Application
ASTM D790, ISO 178 Bending test
ASTM D638 Plastic Tensile Test
ASTM D412 Rubber Tensile Test
Specifications of QC-500M1F
- Max. Capacity: 500kN
- Force Resolution: 1/100,000(31 bit)
- Test Stroke(w/o grip): 1500mm
- Speed Range: 0.0002-330mm/min
- Data sampling rate: Max.400Hz
- Motor: Servo Motor
- Feature
- 1.Equipped with jog controller to adjust displacement precisely
- 2. Optional anti-collision function for protecting loadcells
- 3.Loadcell automatic reading, calibrated without installed on machine
- Dimension: 145 x 85 x 295 cm
- Weight: 2350kg
Accessories
Display Panel
- 7″ color touch TFT display panel is used.
- Chinese, English, Japanese are supported.
- Displays force, pressure, displacement and time.
- Can perform test condition settings: test speed, direction, auto-return, stop at the break point.
- Can analyze max. force, interval force, force at break point, and so on.
- Provides multiple stopping point settings: force, displacement, time and elongation.
- Supports over travel, overload, overtime stop protection settings.
- Can save up to 50 test results; it also supports saving to USB.
- Restore the machine to factory setting is available.
- Can calibrate under stand-alone mode.
- Supports switching between Metric and Imperial units .
QC-551 Long Extensometer
QC-551 Long extensometer is suitable for higher than 20% elongation of rubber, plastic, PE, fabric, webbing of material which are high elongation measurement accessories. The specimen usually made dumbbell-shape. The extensometer can link with Cometech machine and auto-detect the deformation of the test piece during the test.
QC-557 Short extensometer
QC-557 Short extensometer can measure metal, hard plastic of less than 100% elongation of material deformation. During test, it can measure complete test deform rate and do not need to dismantle it when during the test. When the specimen gauge length is longer or elongation rate is bigger, customized longer extensometer is also available.
Software functions
-The data sampling rate is up to 400 Hz..
-Controlled by mouse, keyboard and the up/down button on the machine to quick-adjust the position of grip.
-Windows system required.
-Chinese, English, Japanese, Korean, Portuguese, Polish, Spanish and Russian are available.
-Operation Mode: TCP/IP two-way transmission to connect with PC.
-Can import multiple test data and display at the same time.
-Supports switching between Metric and Imperial units .
-Provides a flexible table for data analysis.
-Can name the data results and create a user-defined formula.
-Data can be shown through the table, graph, or both.
-Data processing: save, import, list, statistical comparison, and so on.
-The X-Y axis of the graph is adjustable including marks on the curve, interval marks, slope, and so on.
-Tensile, compression, bending, spring, and other tests are available.
-Supports over travel, overload, over time stop conditions as machine protection
-Supports various test patterns such as constant tensile (compression) and 10-stage setting.
-Specimen modular design is for easy and quick specimen information setting.
-Test condition modular design can reduce human setting error.
-Supports upper and lower limits for data selection to get the key information.
-Supports multiple I/O ports for the additional test functions.
For more information about products, please contact us:
COMETECH EXCLUSIVE REPRESENTATIVE IN VIETNAM
