Universal materials testing machine QC-546M2F (20kN)
Manufacturer : Cometech – Taiwan
Industry: Rubber, Plastic, Paper, Textile, Metal, Wood, Tape, Electronics, Packaging, Medical, Architecture.
Confirm to ISO 7500-1, ASTM E4 , ASTM D-76, DIN5122 , JIS B7721/B7733 , EN 1002-2, BS1610,GB T228 Standard
Features Universal materials testing machine QC-546M2F :
- QC-546M2F has large test space and long stroke, the maximum test capacity is 20 kN.Maintenance-free transmission mechanism to reduce machine maintenance problems and in the same time it provides a quiet test environment and high-precision test results.
- The machine has single-separated electric control box, separate electronic control system to avoid interference with the transmission components to increase test stability and also conducive to the maintenance and updating of electronic systems.
- Support precision jog wheel can befine tuning machine movement, with precision positioning and accurate calibration to increase test accuracy.
- High-speed signal feedback mechanism can reduce the chance of machine overload.
- The reserved external signal can be connected to an external signal source, increasing machine control mode.
Specifications Universal materials testing machine QC-546M2F :
|Units||Force: gf, kgf, lbf, N, kN, ozf, tonf(SI), ton(long), tonf(short)|
Pressure: Kpa, Mpa, psi, bar, mm-Aq, mm-Hg
|Force Resolution||31 bits|
|Test stroke(w/o grip)||850mm||1250mm|
|Stroke resolution||0.0002 ~ 1000 mm/min adjustable（Set up by computerized）|
|Speed accuracy at High speed mode||0.05 ~ 1000 mm/min|
|Speed accuracy at Low speed mode||0.0002~3 mm/min|
|PC-Port||upper limit, lower limit, emergency stop button|
|Data sampling rate||Servo motor|
|Feature||※Automatic reading of load cell feature information|
※Automatic reading ofdisplacement sensor feature information
※force display, displacement display, time display, stress display and strain display
※External analog input (2-channel simultaneous reading of voltage or current)
※Test force automatically zero
※Test force self-defined calibration
※Force overload protection
|Power Supply||Single phase 200V-240 V, 5A|
|Dimension of Machine||98 x 57 x 148 cm||100 x 58 x 190 cm|
|Dimension of Machine||145kgf||170kgf|
1. Data sample rate faster can be set up to 1200 Hz
2. Operation method:Full-computerized control to run the test or Jog button control
3. Compatible with Window 7 /8 system
4. Software has multi-languages.
5. Interface for TCP/IP
6. Multi-curves display and real-time plot
7. Various units of measurement are available
8. Flexible form to manage database.
9. Free to name the data file.
10. Testing screen is selective to display data, graph at the same time.
11. Data processing: file saving, setting loading, report printing and data comparing.
12. Graph display: strain v.s. elongation, strain v.s. time and so on.
13. Tensile test, compression test, bending test, peel test…
14. Software protection: Overload, over -displacement ,over-time protection
15.Variety of test actions, ex.reciprocation, creep, hold tensile (compression), test pause, slip test, etc.
16.Modularization of specimen setting, providing easy to set specimen.
17.Modularization of test conditions to reduce artificial settingnegligence and error.
18.Key data capture, can set the upper and lower limits of test data specifications
19.Support multiple sets of I / O signals, increase testing mechanism
For more information about products, please contact us:
COMETECH EXCLUSIVE REPRESENTATIVE IN VIETNAM
See more product :