Close

Sản phẩm

  • Computerized Tensile testing machine QC-500M1F

Computerized Tensile testing machine QC-500M1F & QC-50AM1F

From

Computerized Tensile (compression) testing machine Confirm to ISO 7500-1, JJG475-88 , ASTM E4 , DIN5122 , JIS B7721/B7733 , EN 10002-1,EN 1002-2,BS1610,GB228 Standard. This serial model is capable for the capacity that above 500KN test.It is design for tensile test, compression test, bending testand all kind of test. The UTM with high torque servo motor and high rigidity, high strength provide the motion and power. Effectively decrease the maintenance fee, also extend the life time of machine.It is suitable for Metal and Architecture industry. Also provide the quiet testing environment and high accuracy test result

In stock

COMPUTERIZED TENSILE TESTING MACHINE QC-500M1F & QC-50AM1F (500 ~ 600kN)
MODEL: QC-50AM1F VÀ 500M1F

MANUFACTURER: COMETECH – TAIWAN

ORIGIN: TAIWAN

Application:

Industry:Plastic、 Textile、Metal and Architecture.

Features Computerized Tensile testing machine QC-500M1F & QC-50AM1F:

  • Computerized Tensile (compression) testing machine Confirm to ISO 7500-1, JJG475-88 , ASTM E4 , DIN5122 , JIS B7721/B7733 , EN 10002-1,EN 1002-2,BS1610,GB228 Standard
  • This serial model is capable for the capacity that above 500KN test.It is design for tensile test, compression test, bending testand all kind of test. The UTM with high torque servo motor and high rigidity, high strength provide the motion and power. Effectively decrease the maintenance fee, also extend the life time of machine.It is suitable for Metal and Architecture industry. Also provide the quiet testing environment and high accuracy test result
  • Go with Cometech specialist M2 testing software which is used Windows 7/8 of Person computer. It can do tensile test, compression test, bending test and a kind of test. The software with multi-languages is very easy to operation. It also has all kind of metric units, real-time graphs and also provides complete analysis test data which finish test can do variety of material analysis.
  • Standard equipped with sophisticated hand wheel which can be in precision position. The external signals can connect an external test signal function to expand to machine operating modes.

Specifications Computerized Tensile testing machine QC-500M1F & QC-50AM1F: 

Computerized Tensile testing machine QC-500M1F & QC-50AM1F

Computerized Tensile testing machine QC-500M1F & QC-50AM1F

 

ModelQC-50AM1FQC-500M1F
Max. Capacity600kN500kN
UnitsForce: gf, kgf, lbf, N, kN, ozf, tonf(SI), ton(long), tonf(short)
Pressure: Kpa, Mpa, psi, bar, mm-Aq, mm-Hg
Force Resolution31 bits
Force Precision1/100,000
Test stroke(w/o grip)1500mm
Stroke resolution0.0001mm
Space between columns550mm
Speed range0.0002 ~ 330 mm/min
Speed accuracy at High speed mode0.02 ~ 330 mm/min
Speed accuracy at Low speed mode0.0002~2 mm/min
PC-PortRJ45(TCP/IP)
Data sampling rate1200Hz (Max.)
Hardware safety protectionupper limit, lower limit, emergency stop button
Motor typeServo motor
Power Supply3 phase 200V-240 V, 5A
Dimension of Machine155 x 85 x 295 cm
Weight of Machine2350kg
Feature※Automatic reading of load cell feature information
※Automatic reading ofdisplacement sensor feature information
※force display, displacement display, time display, stress display and strain display
※External analog input (2-channel simultaneous reading of voltage or current)
※Test force automatically zero
※Test force self-defined calibration
※Break detection
※Automatic return
※Force overload protection

 

Software: 

Giao diện phần mềm

Software function

bảng kết quả phần mềm

Software interface

1. Data sample rate faster can be set up to 1200 Hz
2. Operation method:Full-computerized control to run the test or Jog button control
3. Compatible with Window 7 /8 system
4. Software has multi-languages.
5. Interface for TCP/IP
6. Multi-curves display and real-time plot
7. Various units of measurement are available
8. Flexible form to manage database.
9. Free to name the data file.
10. Testing screen is selective to display data, graph at the same time.
11. Data processing: file saving, setting loading, report printing and data comparing.
12. Graph display: strain v.s. elongation, strain v.s. time and so on.
13. Tensile test, compression test, bending test, peel test…
14. Software protection: Overload, over -displacement ,over-time protection
15.Variety of test actions, ex.reciprocation, creep, hold tensile (compression), test pause, slip test, etc.
16.Modularization of specimen setting, providing easy to set specimen.
17.Modularization of test conditions to reduce artificial settingnegligence and error.
18.Key data capture, can set the upper and lower limits of test data specifications
19.Support multiple sets of I / O signals, increase testing mechanism

See more product  UNIVERSAL materials testing machine QC-513D1 & QC-508D1


 

For more information about products, please contact us:
COMETECH EXCLUSIVE REPRESENTATIVE IN VIETNAM

Please refer to the product by the following link:

Computerized Tensile testing machine QC-500M1F & QC-50AM1F

Hotline: 0916334243